ISW-801T - 8-Port 10/100TX Industrial Fast Ethernet Switch

Hardware Specifications | |
---|---|
Hardware Version | 3 |
Copper Ports | 8 x 10/100BASE-TX RJ45 TP auto-MDI/MDI-X, auto negotiation |
Connector | Removable 6-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 |
Alarm | Provides one relay output for power failure; Alarm relay current carry ability: 1A @ DC 24V |
LED | 3 x LED for system and power: Green: DC Power 1 Green: DC Power 2 Red: Power Alarm 1 x LED for each copper port: Green: 10/100Mbps LNK/ACT |
ESD Protection | 6KV |
EFT Protection | 6KV |
Power Requirements | 12~48V DC, redundant power with reverse polarity protection, 24V AC power support |
Power Consumption/ Dissipation | Max. 0.9 watts/3.07BTU (Power on without any connection) Max. 2.1 watts/7.16BTU (Ethernet full loading) |
Installation | DIN-rail kit and wall-mount ear |
Enclosure | IP30-rated metal case |
Dimensions (W x D x H) | 32 x 87 x 135mm |
Weight | 428g |
Switch Specifications | |
Switch Processing Scheme | Store-and-Forward |
Address Table | 1K |
Shared Data Buffer | 448K bits |
Flow Control | Back pressure for half duplex, IEE 802.3x pause frame for full duplex |
Switch Fabric | 1.6Gbps |
Throughput (packet per second) | 1.19Mpps |
Network Cables | 10/100BASE-TX Cat. 3, 4, 5, 5e, 6 UTP cable (max. 100 meters) EIA/TIA-568 100-ohm STP (max. 100 meters) |
Standards Conformance | |
Standards Compliance | IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3x Full Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet PROFINET protocol |
Regulatory Compliance | FCC Part 15 Class A, CE |
Stability Testing | IEC60068-2-32 (free fall) IEC60068-2-27 (shock) IEC60068-2-6 (vibration) |
Environment | |
Temperature | Operating: -40~75 degrees C Storage: -40~75 degrees C |
Humidity | Operating: 5% to 95%, Storage: 5% to 95% (non-condensing) |